docs » hs.milight


Simple controls for the MiLight LED WiFi bridge (also known as LimitlessLED and EasyBulb)

API Overview

API Documentation

Constants

maxBrightness

Signature hs.milight.maxBrightness
Type Constant
Description Specifies the maximum brightness value that can be used. Defaults to 25

minBrightness

Signature hs.milight.minBrightness
Type Constant
Description Specifies the minimum brightness value that can be used. Defaults to 0

Constructors

new

Signature hs.milight.new(ip[, port]) -> bridge
Type Constructor
Description Creates a new bridge object, which will be connected to the supplied IP address and port
Parameters
  • ip - A string containing the IP address of the MiLight WiFi bridge device. For convenience this can be the broadcast address of your network (e.g. 192.168.0.255)
  • port - An optional number containing the UDP port to talk to the bridge on. Defaults to 8899
Returns
  • An `hs.milight` object
Notes
  • You can not use 255.255.255.255 as the IP address, to do so requires elevated privileges for the Hammerspoon process

Methods

delete

Signature hs.milight:delete()
Type Method
Description Deletes an hs.milight object
Parameters
  • None
Returns
  • None

disco

Signature hs.milight:disco() -> bool
Type Method
Description Cycles through the disco modes
Parameters
  • None
Returns
  • True if the command was sent correctly, otherwise false

send

Signature hs.milight:send(cmd[, value]) -> bool
Type Method
Description Sends a command to the bridge
Parameters
  • cmd - A command from the `hs.milight.cmd` table
  • value - An optional value, if appropriate for the command (defaults to 0x00)
Returns
  • True if the command was sent, otherwise false
Notes
  • This is a low level command, you typically should use a specific method for the operation you want to perform

zoneBrightness

Signature hs.milight:zoneBrightness(zone, value) -> integer
Type Method
Description Sets brightness for the specified zone
Parameters
  • zone - A number specifying which zone to operate on. 0 for all zones, 1-4 for zones one through four
  • value - A number containing the brightness level to set, between `hs.milight.minBrightness` and `hs.milight.maxBrightness`
Returns
  • A number containing the value that was sent to the WiFi bridge, or -1 if an error occurred

zoneColor

Signature hs.milight:zoneColor(zone, value) -> bool
Type Method
Description Sets RGB color for the specified zone
Parameters
  • zone - A number specifying which zone to operate on. 0 for all zones, 1-4 for zones one through four
  • value - A number between 0 and 255 that represents a color
Returns
  • True if the command was sent correctly, otherwise false
Notes
  • The color value is not a normal RGB colour, but rather a lookup in an internal table in the light hardware. While any number between 0 and 255 is valid, there are some useful values worth knowing:
  • 00 - Violet
  • 16 - Royal Blue
  • 32 - Baby Blue
  • 48 - Aqua
  • 64 - Mint Green
  • 80 - Seafoam Green
  • 96 - Green
  • 112 - Lime Green
  • 128 - Yellow
  • 144 - Yellowy Orange
  • 160 - Orange
  • 176 - Red
  • 194 - Pink
  • 210 - Fuscia
  • 226 - Lilac
  • 240 - Lavendar

zoneOff

Signature hs.milight:zoneOff(zone) -> bool
Type Method
Description Turns off the specified zone
Parameters
  • zone - A number specifying which zone to operate on. 0 for all zones, 1-4 for zones one through four
Returns
  • True if the command was sent correctly, otherwise false

zoneOn

Signature hs.milight:zoneOn(zone) -> bool
Type Method
Description Turns on the specified zone
Parameters
  • zone - A number specifying which zone to operate on. 0 for all zones, 1-4 for zones one through four
Returns
  • True if the command was sent correctly, otherwise false

zoneWhite

Signature hs.milight:zoneWhite(zone) -> bool
Type Method
Description Sets the specified zone to white
Parameters
  • zone - A number specifying which zone to operate on. 0 for all zones, 1-4 for zones one through four
Returns
  • True if the command was sent correctly, otherwise false

results matching ""

    No results matching ""